github-starred/ultimatepp
2
0
Fork 0
mirror of https://github.com/ultimatepp/ultimatepp.git synced 2026-05-18 06:06:01 -06:00
Code Issues 33 Projects Packages Wiki Activity Actions
ultimatepp/bazaar/PixRaster/lib/rotate.c
micio db3a6a0036 Start of Leptonica library support 
git-svn-id: svn://ultimatepp.org/upp/trunk@1554 f0d560ea-af0d-0410-9eb7-867de7ffcac7
2009-09-06 15:49:56 +00:00

385 lines
14 KiB
C
Raw Blame History

/*====================================================================*
- Copyright (C) 2001 Leptonica. All rights reserved.
- This software is distributed in the hope that it will be
- useful, but with NO WARRANTY OF ANY KIND.
- No author or distributor accepts responsibility to anyone for the
- consequences of using this software, or for whether it serves any
- particular purpose or works at all, unless he or she says so in
- writing. Everyone is granted permission to copy, modify and
- redistribute this source code, for commercial or non-commercial
- purposes, with the following restrictions: (1) the origin of this
- source code must not be misrepresented; (2) modified versions must
- be plainly marked as such; and (3) this notice may not be removed
- or altered from any source or modified source distribution.
*====================================================================*/
/*
* rotate.c
*
* General rotation about image center
* PIX *pixRotate()
* PIX *pixEmbedForRotation()
*
* General rotation by sampling
* PIX *pixRotateBySampling()
*
* Rotations are measured in radians; clockwise is positive.
*
* The general rotation pixRotate() does the best job for
* rotating about the image center. For 1 bpp, it uses shear;
* for others, it uses either shear or area mapping.
* If requested, it expands the output image so that no pixels are lost
* in the rotation, and this can be done on multiple successive shears
* without expanding beyond the maximum necessary size.
*/
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include "allheaders.h"
static const l_float32 VERY_SMALL_ANGLE = 0.001; /* radians; ~0.06 degrees */
/*------------------------------------------------------------------*
* General rotation about the center *
*------------------------------------------------------------------*/
/*!
* pixRotate()
*
* Input: pixs (1, 2, 4, 8, 32 bpp rgb)
* angle (radians; clockwise is positive)
* type (L_ROTATE_AREA_MAP, L_ROTATE_SHEAR, L_ROTATE_SAMPLING)
* incolor (L_BRING_IN_WHITE, L_BRING_IN_BLACK)
* width (original width; use 0 to avoid embedding)
* height (original height; use 0 to avoid embedding)
* Return: pixd, or null on error
*
* Notes:
* (1) Rotation is about the center of the image.
* (2) For very small rotations, just return a clone.
* (3) Rotation brings either white or black pixels in
* from outside the image.
* (4) Above 20 degrees, if rotation by shear is requested, we rotate
* by sampling.
* (5) Colormaps are removed for rotation by area map and shear.
* (6) The dest can be expanded so that no image pixels
* are lost. To invoke expansion, input the original
* width and height. For repeated rotation, use of the
* original width and height allows the expansion to
* stop at the maximum required size, which is a square
* with side = sqrt(w*w + h*h).
*
* *** Warning: implicit assumption about RGB component ordering ***
*/
PIX *
pixRotate(PIX *pixs,
l_float32 angle,
l_int32 type,
l_int32 incolor,
l_int32 width,
l_int32 height)
{
l_int32 w, h, d;
l_uint32 fillval;
PIX *pixt1, *pixt2, *pixt3, *pixd;
PIXCMAP *cmap;
PROCNAME("pixRotate");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
if (type != L_ROTATE_SHEAR && type != L_ROTATE_AREA_MAP &&
type != L_ROTATE_SAMPLING)
return (PIX *)ERROR_PTR("invalid type", procName, NULL);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return (PIX *)ERROR_PTR("invalid incolor", procName, NULL);
if (L_ABS(angle) < VERY_SMALL_ANGLE)
return pixClone(pixs);
/* Don't rotate by shear more than 20 degrees */
if (L_ABS(angle) > 0.35 && type == L_ROTATE_SHEAR) {
L_WARNING("large angle; rotating by sampling", procName);
type = L_ROTATE_SAMPLING;
}
/* If 1 bpp and area map is requested, rotate by sampling */
d = pixGetDepth(pixs);
if (d == 1 && type == L_ROTATE_AREA_MAP) {
L_WARNING("1 bpp; rotating by sampling", procName);
type = L_ROTATE_SAMPLING;
}
/* Remove colormap if we're rotating by area mapping. */
cmap = pixGetColormap(pixs);
if (cmap && type == L_ROTATE_AREA_MAP)
pixt1 = pixRemoveColormap(pixs, REMOVE_CMAP_BASED_ON_SRC);
else
pixt1 = pixClone(pixs);
cmap = pixGetColormap(pixt1);
/* Otherwise, if there is a colormap and we're not embedding,
* add white color if it doesn't exist. */
if (cmap && width == 0) { /* no embedding; generate @incolor */
if (incolor == L_BRING_IN_BLACK)
pixcmapAddBlackOrWhite(cmap, 0, NULL);
else /* L_BRING_IN_WHITE */
pixcmapAddBlackOrWhite(cmap, 1, NULL);
}
/* Request to embed in a larger image; do if necessary */
pixt2 = pixEmbedForRotation(pixt1, angle, incolor, width, height);
/* Area mapping requires 8 or 32 bpp.
* If 1 bpp, default to sampling. */
d = pixGetDepth(pixt2);
if (type == L_ROTATE_AREA_MAP && d < 8)
pixt3 = pixConvertTo8(pixt2, FALSE);
else
pixt3 = pixClone(pixt2);
/* Rotate by shear or area mapping */
pixGetDimensions(pixt3, &w, &h, &d);
if (type == L_ROTATE_SHEAR)
pixd = pixRotateShearCenter(pixt3, angle, incolor);
else if (type == L_ROTATE_SAMPLING)
pixd = pixRotateBySampling(pixt3, w / 2, h / 2, angle, incolor);
else { /* rotate by area mapping */
fillval = 0;
if (incolor == L_BRING_IN_WHITE) {
if (d == 8)
fillval = 255;
else /* d == 32 */
fillval = 0xffffff00;
}
if (d == 8)
pixd = pixRotateAMGray(pixt3, angle, fillval);
else /* d == 32 */
pixd = pixRotateAMColor(pixt3, angle, fillval);
}
pixDestroy(&pixt1);
pixDestroy(&pixt2);
pixDestroy(&pixt3);
return pixd;
}
/*!
* pixEmbedForRotation()
*
* Input: pixs (1, 2, 4, 8, 32 bpp rgb)
* angle (radians; clockwise is positive)
* incolor (L_BRING_IN_WHITE, L_BRING_IN_BLACK)
* width (original width; use 0 to avoid embedding)
* height (original height; use 0 to avoid embedding)
* Return: pixd, or null on error
*
* Notes:
* (1) For very small rotations, just return a clone.
* (2) Generate larger image to embed pixs if necessary, and
* place in the center.
* (3) Rotation brings either white or black pixels in
* from outside the image. For colormapped images where
* there is no white or black, a new color is added if
* possible for these pixels; otherwise, either the
* lightest or darkest color is used. In most cases,
* the colormap will be removed prior to rotation.
* (4) The dest is to be expanded so that no image pixels
* are lost after rotation. Input of the original width
* and height allows the expansion to stop at the maximum
* required size, which is a square with side equal to
* sqrt(w*w + h*h).
* (5) Let theta be atan(w/h). Then the height after rotation
* cannot increase by a factor more than
* cos(theta - |angle|)
* whereas the width after rotation cannot increase by a
* factor more than
* sin(theta + |angle|)
* These must be clipped to the maximal side, and additionally,
* we don't allow either the width or height to decrease.
*/
PIX *
pixEmbedForRotation(PIX *pixs,
l_float32 angle,
l_int32 incolor,
l_int32 width,
l_int32 height)
{
l_int32 w, h, d, maxside, wnew, hnew, xoff, yoff;
l_float64 pi, theta, absangle, alpha, beta, diag;
PIX *pixd;
PROCNAME("pixEmbedForRotation");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
if (L_ABS(angle) < VERY_SMALL_ANGLE)
return pixClone(pixs);
/* Test if big enough to hold any rotation */
pixGetDimensions(pixs, &w, &h, &d);
maxside = (l_int32)(sqrt((l_float64)(width * width) +
(l_float64)(height * height)) + 0.5);
if (w >= maxside && h >= maxside) /* big enough */
return pixClone(pixs);
/* Find the new sizes required to hold the image after rotation */
pi = 3.1415926535;
theta = atan((l_float64)w / (l_float64)h);
absangle = (l_float64)(L_ABS(angle));
alpha = theta - absangle;
beta = theta + absangle;
diag = sqrt((l_float64)(w * w) + (l_float64)(h * h));
wnew = (l_int32)(diag * sin(beta) + 0.5);
hnew = (l_int32)(diag * cos(alpha) + 0.5);
wnew = L_MAX(w, wnew); /* don't let it get smaller */
hnew = L_MAX(h, hnew); /* don't let it get smaller */
if (wnew >= maxside) /* clip */
wnew = maxside;
if (hnew >= maxside) /* clip */
hnew = maxside;
if ((pixd = pixCreate(wnew, hnew, d)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
pixCopyResolution(pixd, pixs);
pixCopyColormap(pixd, pixs);
pixCopyText(pixd, pixs);
xoff = (wnew - w) / 2;
yoff = (hnew - h) / 2;
/* Set background to color to be rotated in */
pixSetBlackOrWhite(pixd, incolor);
pixRasterop(pixd, xoff, yoff, w, h, PIX_SRC, pixs, 0, 0);
return pixd;
}
/*------------------------------------------------------------------*
* General rotation by sampling *
*------------------------------------------------------------------*/
/*!
* pixRotateBySampling()
*
* Input: pixs (1, 2, 4, 8, 16, 32 bpp rgb; can be cmapped)
* xcen (x value of center of rotation)
* ycen (y value of center of rotation)
* angle (radians; clockwise is positive)
* incolor (L_BRING_IN_WHITE, L_BRING_IN_BLACK)
* Return: pixd, or null on error
*
* Notes:
* (1) For very small rotations, just return a clone.
* (2) Rotation brings either white or black pixels in
* from outside the image.
* (3) Colormaps are retained.
*/
PIX *
pixRotateBySampling(PIX *pixs,
l_int32 xcen,
l_int32 ycen,
l_float32 angle,
l_int32 incolor)
{
l_int32 w, h, d, i, j, x, y, xdif, ydif, wm1, hm1, wpld;
l_uint32 val;
l_float32 sina, cosa;
l_uint32 *datad, *lined;
void **lines;
PIX *pixd;
PROCNAME("pixRotateBySampling");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return (PIX *)ERROR_PTR("invalid incolor", procName, NULL);
pixGetDimensions(pixs, &w, &h, &d);
if (d != 1 && d != 2 && d != 4 && d != 8 && d != 16 && d != 32)
return (PIX *)ERROR_PTR("invalid depth", procName, NULL);
if (L_ABS(angle) < VERY_SMALL_ANGLE)
return pixClone(pixs);
if ((pixd = pixCreateTemplateNoInit(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
pixSetBlackOrWhite(pixd, incolor);
sina = sin(angle);
cosa = cos(angle);
datad = pixGetData(pixd);
wpld = pixGetWpl(pixd);
wm1 = w - 1;
hm1 = h - 1;
lines = pixGetLinePtrs(pixs, NULL);
/* Treat 1 bpp case specially */
if (d == 1) {
for (i = 0; i < h; i++) { /* scan over pixd */
lined = datad + i * wpld;
ydif = ycen - i;
for (j = 0; j < w; j++) {
xdif = xcen - j;
x = xcen + (l_int32)(-xdif * cosa - ydif * sina);
if (x < 0 || x > wm1) continue;
y = ycen + (l_int32)(-ydif * cosa + xdif * sina);
if (y < 0 || y > hm1) continue;
if (incolor == L_BRING_IN_WHITE) {
if (GET_DATA_BIT(lines[y], x))
SET_DATA_BIT(lined, j);
}
else {
if (!GET_DATA_BIT(lines[y], x))
CLEAR_DATA_BIT(lined, j);
}
}
}
FREE(lines);
return pixd;
}
for (i = 0; i < h; i++) { /* scan over pixd */
lined = datad + i * wpld;
ydif = ycen - i;
for (j = 0; j < w; j++) {
xdif = xcen - j;
x = xcen + (l_int32)(-xdif * cosa - ydif * sina);
if (x < 0 || x > wm1) continue;
y = ycen + (l_int32)(-ydif * cosa + xdif * sina);
if (y < 0 || y > hm1) continue;
switch (d)
{
case 8:
val = GET_DATA_BYTE(lines[y], x);
SET_DATA_BYTE(lined, j, val);
break;
case 32:
val = GET_DATA_FOUR_BYTES(lines[y], x);
SET_DATA_FOUR_BYTES(lined, j, val);
break;
case 2:
val = GET_DATA_DIBIT(lines[y], x);
SET_DATA_DIBIT(lined, j, val);
break;
case 4:
val = GET_DATA_QBIT(lines[y], x);
SET_DATA_QBIT(lined, j, val);
break;
case 16:
val = GET_DATA_TWO_BYTES(lines[y], x);
SET_DATA_TWO_BYTES(lined, j, val);
break;
default:
return (PIX *)ERROR_PTR("invalid depth", procName, NULL);
}
}
}
FREE(lines);
return pixd;
}
Reference in a new issue View git blame Copy permalink