github-starred/frp

Fork 0

mirror of https://github.com/fatedier/frp.git synced 2026-05-15 08:05:49 -06:00

[GH-ISSUE #3985] [W] [control.go:168] [3f30cb330bc4eddb] [web-istoreos] start error: custom domain [i.frp.aaa.com] should not belong to subdomain host [frp.aaa.com] #3161

New issue

Closed

opened 2026-05-05 14:02:45 -06:00 by gitea-mirror · 3 comments

gitea-mirror commented

2026-05-05 14:02:45 -06:00

Owner

Originally created by @blankhang on GitHub (Feb 11, 2024).
Original GitHub issue: https://github.com/fatedier/frp/issues/3985

Bug Description

以前的旧版本.ini 是可以这样配置3级域名
升级到toml 现在的版本启动报错

frpc Version

0.54

frps Version

0.54

System Architecture

linux/amd64,

Configurations

frpc

serverAddr = "aaa"
serverPort = 7000


auth.method = "token"
# auth token
auth.token = "abcdef"

# connections will be established in advance, default value is zero
transport.poolCount = 5

# If tcp stream multiplexing is used, default is true, it must be same with frps
# transport.tcpMux = true

# Specify keep alive interval for tcp mux.
# only valid if tcpMux is enabled.
# transport.tcpMuxKeepaliveInterval = 60

# Communication protocol used to connect to server
# supports tcp, kcp, quic, websocket and wss now, default is tcp
transport.protocol = "tcp"

# set client binding ip when connect server, default is empty.
# only when protocol = tcp or websocket, the value will be used.
transport.connectServerLocalIP = "0.0.0.0"

# if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set proxyURL here or in global environment variables
# it only works when protocol is tcp
# transport.proxyURL = "http://user:passwd@192.168.1.128:8080"
# transport.proxyURL = "socks5://user:passwd@192.168.1.128:1080"
# transport.proxyURL = "ntlm://user:passwd@192.168.1.128:2080"

# quic protocol options
# transport.quic.keepalivePeriod = 10
# transport.quic.maxIdleTimeout = 30
# transport.quic.maxIncomingStreams = 100000

# If tls.enable is true, frpc will connect frps by tls.
# Since v0.50.0, the default value has been changed to true, and tls is enabled by default.
transport.tls.enable = true

# transport.tls.certFile = "client.crt"
# transport.tls.keyFile = "client.key"
# transport.tls.trustedCaFile = "ca.crt"
# transport.tls.serverName = "example.com"

# If the disableCustomTLSFirstByte is set to false, frpc will establish a connection with frps using the
# first custom byte when tls is enabled.
# Since v0.50.0, the default value has been changed to true, and the first custom byte is disabled by default.
# transport.tls.disableCustomTLSFirstByte = true

# Heartbeat configure, it's not recommended to modify the default value.
# The default value of heartbeatInterval is 10 and heartbeatTimeout is 90. Set negative value
# to disable it.
# transport.heartbeatInterval = 30
# transport.heartbeatTimeout = 90

# Specify a dns server, so frpc will use this instead of default one
# dnsServer = "8.8.8.8"

# Proxy names you want to start.
# Default is empty, means all proxies.
# start = ["ssh", "dns"]

# Specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
udpPacketSize = 1500


[[proxies]]
name = "ssl-local-17"
type = "tcp"
localIP = "192.168.50.17"
localPort = 22
remotePort = 12345


[[proxies]]
name = "rpd-local-2"
type = "tcp"
localIP = "192.168.50.2"
localPort = 3389
remotePort = 12346


[[proxies]]
name = "web-istoreos"
type = "http"
localIP = "192.168.50.17"
localPort = 80
subdomain = "i"
customDomains = ["i.frp.aaa.com"]


[[proxies]]
name = "web-lucky"
type = "http"
localIP = "192.168.50.17"
localPort = 16601
subdomain = "lucky"

frps

# This configuration file is for reference only. Please do not use this configuration directly to run the program as it may have various issues.

# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
# For single "bindAddr" field, no need square brackets, like `bindAddr = "::"`.
bindAddr = "0.0.0.0"
bindPort = 7000

# udp port used for kcp protocol, it can be same with 'bindPort'.
# if not set, kcp is disabled in frps.
kcpBindPort = 7000

# udp port used for quic protocol.
# if not set, quic is disabled in frps.
quicBindPort = 7001

# Specify which address proxy will listen for, default value is same with bindAddr
# proxyBindAddr = "127.0.0.1"

# quic protocol options
# transport.quic.keepalivePeriod = 10
# transport.quic.maxIdleTimeout = 30
# transport.quic.maxIncomingStreams = 100000

# Heartbeat configure, it's not recommended to modify the default value
# The default value of heartbeatTimeout is 90. Set negative value to disable it.
# transport.heartbeatTimeout = 90

# Pool count in each proxy will keep no more than maxPoolCount.
transport.maxPoolCount = 10

# If tcp stream multiplexing is used, default is true
transport.tcpMux = true

# Specify keep alive interval for tcp mux.
# only valid if tcpMux is true.
# transport.tcpMuxKeepaliveInterval = 60

# tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
# If negative, keep-alive probes are disabled.
# transport.tcpKeepalive = 7200

# transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false.
transport.tls.force = false

# transport.tls.certFile = "server.crt"
# transport.tls.keyFile = "server.key"
# transport.tls.trustedCaFile = "ca.crt"

# If you want to support virtual host, you must set the http port for listening (optional)
# Note: http port and https port can be same with bindPort
vhostHTTPPort = 11101
vhostHTTPSPort = 11102

# Response header timeout(seconds) for vhost http server, default is 60s
# vhostHTTPTimeout = 60

# tcpmuxHTTPConnectPort specifies the port that the server listens for TCP
# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
# requests on one single port. If it's not - it will listen on this value for
# HTTP CONNECT requests. By default, this value is 0.
# tcpmuxHTTPConnectPort = 1337

# If tcpmuxPassthrough is true, frps won't do any update on traffic.
# tcpmuxPassthrough = false

# Configure the web server to enable the dashboard for frps.
# dashboard is available only if webServer.port is set.
webServer.addr = "127.0.0.1"
webServer.port = 11001
webServer.user = "blankhang"
webServer.password = "63032569"
# webServer.tls.certFile = "server.crt"
# webServer.tls.keyFile = "server.key"
# dashboard assets directory(only for debug mode)
# webServer.assetsDir = "./static"

# Enable golang pprof handlers in dashboard listener.
# Dashboard port must be set first
webServer.pprofEnable = false

# enablePrometheus will export prometheus metrics on webServer in /metrics api.
enablePrometheus = true

# console or real logFile path like ./frps.log
log.to = "./frps.log"
# trace, debug, info, warn, error
log.level = "info"
log.maxDays = 3
# disable log colors when log.to is console, default is false
log.disablePrintColor = false

# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
detailedErrorsToClient = true

# auth.method specifies what authentication method to use authenticate frpc with frps.
# If "token" is specified - token will be read into login message.
# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
auth.method = "token"

# auth.additionalScopes specifies additional scopes to include authentication information.
# Optional values are HeartBeats, NewWorkConns.
# auth.additionalScopes = ["HeartBeats", "NewWorkConns"]

# auth token
auth.token = "abcdef"

# oidc issuer specifies the issuer to verify OIDC tokens with.
auth.oidc.issuer = ""
# oidc audience specifies the audience OIDC tokens should contain when validated.
auth.oidc.audience = ""
# oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired.
auth.oidc.skipExpiryCheck = false
# oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
auth.oidc.skipIssuerCheck = false



# If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file
# When subdomain is test, the host used by routing is test.frps.com
subDomainHost = "frp.mayangmedia.com"

# custom 404 page for HTTP requests
# custom404Page = "/path/to/404.html"

# specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
udpPacketSize = 1500

# Retention time for NAT hole punching strategy data.
natholeAnalysisDataReserveHours = 168

# ssh tunnel gateway
# If you want to enable this feature, the bindPort parameter is required, while others are optional.
# By default, this feature is disabled. It will be enabled if bindPort is greater than 0.
# sshTunnelGateway.bindPort = 2200
# sshTunnelGateway.privateKeyFile = "/home/frp-user/.ssh/id_rsa"
# sshTunnelGateway.autoGenPrivateKeyPath = ""
# sshTunnelGateway.authorizedKeysFile = "/home/frp-user/.ssh/authorized_keys"

#[[httpPlugins]]
#name = "user-manager"
#addr = "127.0.0.1:9000"
#path = "/handler"
#ops = ["Login"]

#[[httpPlugins]]
#name = "port-manager"
#addr = "127.0.0.1:9001"
#path = "/handler"

Logs

frpc  | 2024/02/11 03:43:47 [I] [root.go:142] start frpc service for config file [/etc/frp/frpc.toml]
frpc  | 2024/02/11 03:43:47 [I] [service.go:287] try to connect to server...
frpc  | 2024/02/11 03:43:47 [I] [service.go:279] [3f30cb330bc4eddb] login to server success, get run id [3f30cb330bc4eddb]
frpc  | 2024/02/11 03:43:47 [I] [proxy_manager.go:173] [3f30cb330bc4eddb] proxy added: [ssl-local-17 rpd-local-2 web-istoreos web-lucky]
frpc  | 2024/02/11 03:43:47 [I] [control.go:170] [3f30cb330bc4eddb] [rpd-local-2] start proxy success
frpc  | 2024/02/11 03:43:47 [I] [control.go:170] [3f30cb330bc4eddb] [ssl-local-17] start proxy success
frpc  | 2024/02/11 03:43:47 [W] [control.go:168] [3f30cb330bc4eddb] [web-istoreos] start error: custom domain [i.frp.aaa.com] should not belong to subdomain host [frp.aaa.com]
frpc  | 2024/02/11 03:43:47 [W] [control.go:168] [3f30cb330bc4eddb] [web-lucky] start error: custom domain [lucky.frp.aaa.com] should not belong to subdomain host [frp.aaa.com]

nginx frp

#
# istoreos to local 17
#
server {
        listen 80;
        server_name i.frp.aaa.com;
        return 301 https://$host$request_uri;
}

server {
        listen 443 ssl;
        server_name i.frp.aaa.com;
        
        # load ssl conf
        include /etc/nginx/ssl/options-ssl-nginx.conf;

        #local istoreos
        location /{
            proxy_pass http://127.0.0.1:11101;
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
            proxy_set_header Host $http_host;
            proxy_set_header X-NginX-Proxy true;
            proxy_http_version 1.1;
            proxy_set_header Upgrade $http_upgrade;
            proxy_set_header Connection "upgrade";
            proxy_max_temp_file_size 0;
            proxy_redirect off;
            proxy_read_timeout 240s;
        }
}

打开域名显示
i.frp.aaa.com/lucky.frp.aaa.com

The page you requested was not found.
Sorry, the page you are looking for is currently unavailable.
Please try again later.

The server is powered by [frp](https://github.com/fatedier/frp).

Faithfully yours, frp.

Steps to reproduce

...
使用如下配置，启动frps 无异常日志
启动frpc 有报错

Affected area

Docs
Installation
Performance and Scalability
Security
User Experience
Test and Release
Developer Infrastructure
Client Plugin
Server Plugin
Extensions
Others

Originally created by @blankhang on GitHub (Feb 11, 2024). Original GitHub issue: https://github.com/fatedier/frp/issues/3985 ### Bug Description 以前的旧版本.ini 是可以这样配置3级域名升级到toml 现在的版本启动报错 ### frpc Version 0.54 ### frps Version 0.54 ### System Architecture linux/amd64, ### Configurations ### ### frpc ### ```toml serverAddr = "aaa" serverPort = 7000 auth.method = "token" # auth token auth.token = "abcdef" # connections will be established in advance, default value is zero transport.poolCount = 5 # If tcp stream multiplexing is used, default is true, it must be same with frps # transport.tcpMux = true # Specify keep alive interval for tcp mux. # only valid if tcpMux is enabled. # transport.tcpMuxKeepaliveInterval = 60 # Communication protocol used to connect to server # supports tcp, kcp, quic, websocket and wss now, default is tcp transport.protocol = "tcp" # set client binding ip when connect server, default is empty. # only when protocol = tcp or websocket, the value will be used. transport.connectServerLocalIP = "0.0.0.0" # if you want to connect frps by http proxy or socks5 proxy or ntlm proxy, you can set proxyURL here or in global environment variables # it only works when protocol is tcp # transport.proxyURL = "http://user:passwd@192.168.1.128:8080" # transport.proxyURL = "socks5://user:passwd@192.168.1.128:1080" # transport.proxyURL = "ntlm://user:passwd@192.168.1.128:2080" # quic protocol options # transport.quic.keepalivePeriod = 10 # transport.quic.maxIdleTimeout = 30 # transport.quic.maxIncomingStreams = 100000 # If tls.enable is true, frpc will connect frps by tls. # Since v0.50.0, the default value has been changed to true, and tls is enabled by default. transport.tls.enable = true # transport.tls.certFile = "client.crt" # transport.tls.keyFile = "client.key" # transport.tls.trustedCaFile = "ca.crt" # transport.tls.serverName = "example.com" # If the disableCustomTLSFirstByte is set to false, frpc will establish a connection with frps using the # first custom byte when tls is enabled. # Since v0.50.0, the default value has been changed to true, and the first custom byte is disabled by default. # transport.tls.disableCustomTLSFirstByte = true # Heartbeat configure, it's not recommended to modify the default value. # The default value of heartbeatInterval is 10 and heartbeatTimeout is 90. Set negative value # to disable it. # transport.heartbeatInterval = 30 # transport.heartbeatTimeout = 90 # Specify a dns server, so frpc will use this instead of default one # dnsServer = "8.8.8.8" # Proxy names you want to start. # Default is empty, means all proxies. # start = ["ssh", "dns"] # Specify udp packet size, unit is byte. If not set, the default value is 1500. # This parameter should be same between client and server. # It affects the udp and sudp proxy. udpPacketSize = 1500 [[proxies]] name = "ssl-local-17" type = "tcp" localIP = "192.168.50.17" localPort = 22 remotePort = 12345 [[proxies]] name = "rpd-local-2" type = "tcp" localIP = "192.168.50.2" localPort = 3389 remotePort = 12346 [[proxies]] name = "web-istoreos" type = "http" localIP = "192.168.50.17" localPort = 80 subdomain = "i" customDomains = ["i.frp.aaa.com"] [[proxies]] name = "web-lucky" type = "http" localIP = "192.168.50.17" localPort = 16601 subdomain = "lucky" ``` ### ### frps ### ```toml # This configuration file is for reference only. Please do not use this configuration directly to run the program as it may have various issues. # A literal address or host name for IPv6 must be enclosed # in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80" # For single "bindAddr" field, no need square brackets, like `bindAddr = "::"`. bindAddr = "0.0.0.0" bindPort = 7000 # udp port used for kcp protocol, it can be same with 'bindPort'. # if not set, kcp is disabled in frps. kcpBindPort = 7000 # udp port used for quic protocol. # if not set, quic is disabled in frps. quicBindPort = 7001 # Specify which address proxy will listen for, default value is same with bindAddr # proxyBindAddr = "127.0.0.1" # quic protocol options # transport.quic.keepalivePeriod = 10 # transport.quic.maxIdleTimeout = 30 # transport.quic.maxIncomingStreams = 100000 # Heartbeat configure, it's not recommended to modify the default value # The default value of heartbeatTimeout is 90. Set negative value to disable it. # transport.heartbeatTimeout = 90 # Pool count in each proxy will keep no more than maxPoolCount. transport.maxPoolCount = 10 # If tcp stream multiplexing is used, default is true transport.tcpMux = true # Specify keep alive interval for tcp mux. # only valid if tcpMux is true. # transport.tcpMuxKeepaliveInterval = 60 # tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps. # If negative, keep-alive probes are disabled. # transport.tcpKeepalive = 7200 # transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false. transport.tls.force = false # transport.tls.certFile = "server.crt" # transport.tls.keyFile = "server.key" # transport.tls.trustedCaFile = "ca.crt" # If you want to support virtual host, you must set the http port for listening (optional) # Note: http port and https port can be same with bindPort vhostHTTPPort = 11101 vhostHTTPSPort = 11102 # Response header timeout(seconds) for vhost http server, default is 60s # vhostHTTPTimeout = 60 # tcpmuxHTTPConnectPort specifies the port that the server listens for TCP # HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP # requests on one single port. If it's not - it will listen on this value for # HTTP CONNECT requests. By default, this value is 0. # tcpmuxHTTPConnectPort = 1337 # If tcpmuxPassthrough is true, frps won't do any update on traffic. # tcpmuxPassthrough = false # Configure the web server to enable the dashboard for frps. # dashboard is available only if webServer.port is set. webServer.addr = "127.0.0.1" webServer.port = 11001 webServer.user = "blankhang" webServer.password = "63032569" # webServer.tls.certFile = "server.crt" # webServer.tls.keyFile = "server.key" # dashboard assets directory(only for debug mode) # webServer.assetsDir = "./static" # Enable golang pprof handlers in dashboard listener. # Dashboard port must be set first webServer.pprofEnable = false # enablePrometheus will export prometheus metrics on webServer in /metrics api. enablePrometheus = true # console or real logFile path like ./frps.log log.to = "./frps.log" # trace, debug, info, warn, error log.level = "info" log.maxDays = 3 # disable log colors when log.to is console, default is false log.disablePrintColor = false # DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true. detailedErrorsToClient = true # auth.method specifies what authentication method to use authenticate frpc with frps. # If "token" is specified - token will be read into login message. # If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token". auth.method = "token" # auth.additionalScopes specifies additional scopes to include authentication information. # Optional values are HeartBeats, NewWorkConns. # auth.additionalScopes = ["HeartBeats", "NewWorkConns"] # auth token auth.token = "abcdef" # oidc issuer specifies the issuer to verify OIDC tokens with. auth.oidc.issuer = "" # oidc audience specifies the audience OIDC tokens should contain when validated. auth.oidc.audience = "" # oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired. auth.oidc.skipExpiryCheck = false # oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer. auth.oidc.skipIssuerCheck = false # If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file # When subdomain is test, the host used by routing is test.frps.com subDomainHost = "frp.mayangmedia.com" # custom 404 page for HTTP requests # custom404Page = "/path/to/404.html" # specify udp packet size, unit is byte. If not set, the default value is 1500. # This parameter should be same between client and server. # It affects the udp and sudp proxy. udpPacketSize = 1500 # Retention time for NAT hole punching strategy data. natholeAnalysisDataReserveHours = 168 # ssh tunnel gateway # If you want to enable this feature, the bindPort parameter is required, while others are optional. # By default, this feature is disabled. It will be enabled if bindPort is greater than 0. # sshTunnelGateway.bindPort = 2200 # sshTunnelGateway.privateKeyFile = "/home/frp-user/.ssh/id_rsa" # sshTunnelGateway.autoGenPrivateKeyPath = "" # sshTunnelGateway.authorizedKeysFile = "/home/frp-user/.ssh/authorized_keys" #[[httpPlugins]] #name = "user-manager" #addr = "127.0.0.1:9000" #path = "/handler" #ops = ["Login"] #[[httpPlugins]] #name = "port-manager" #addr = "127.0.0.1:9001" #path = "/handler" ``` ### Logs ```sh frpc | 2024/02/11 03:43:47 [I] [root.go:142] start frpc service for config file [/etc/frp/frpc.toml] frpc | 2024/02/11 03:43:47 [I] [service.go:287] try to connect to server... frpc | 2024/02/11 03:43:47 [I] [service.go:279] [3f30cb330bc4eddb] login to server success, get run id [3f30cb330bc4eddb] frpc | 2024/02/11 03:43:47 [I] [proxy_manager.go:173] [3f30cb330bc4eddb] proxy added: [ssl-local-17 rpd-local-2 web-istoreos web-lucky] frpc | 2024/02/11 03:43:47 [I] [control.go:170] [3f30cb330bc4eddb] [rpd-local-2] start proxy success frpc | 2024/02/11 03:43:47 [I] [control.go:170] [3f30cb330bc4eddb] [ssl-local-17] start proxy success frpc | 2024/02/11 03:43:47 [W] [control.go:168] [3f30cb330bc4eddb] [web-istoreos] start error: custom domain [i.frp.aaa.com] should not belong to subdomain host [frp.aaa.com] frpc | 2024/02/11 03:43:47 [W] [control.go:168] [3f30cb330bc4eddb] [web-lucky] start error: custom domain [lucky.frp.aaa.com] should not belong to subdomain host [frp.aaa.com] ``` ### nginx frp ```ini # # istoreos to local 17 # server { listen 80; server_name i.frp.aaa.com; return 301 https://$host$request_uri; } server { listen 443 ssl; server_name i.frp.aaa.com; # load ssl conf include /etc/nginx/ssl/options-ssl-nginx.conf; #local istoreos location /{ proxy_pass http://127.0.0.1:11101; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection "upgrade"; proxy_max_temp_file_size 0; proxy_redirect off; proxy_read_timeout 240s; } } ``` 打开域名显示 i.frp.aaa.com/lucky.frp.aaa.com ```sh The page you requested was not found. Sorry, the page you are looking for is currently unavailable. Please try again later. The server is powered by [frp](https://github.com/fatedier/frp). Faithfully yours, frp. ``` ### Steps to reproduce 1. 2. 3. ... 使用如下配置，启动frps 无异常日志启动frpc 有报错 ### Affected area - [ ] Docs - [ ] Installation - [ ] Performance and Scalability - [ ] Security - [ ] User Experience - [ ] Test and Release - [ ] Developer Infrastructure - [ ] Client Plugin - [ ] Server Plugin - [ ] Extensions - [ ] Others

gitea-mirror

2026-05-05 14:02:45 -06:00

closed this issue
added the
lifecycle/stale
label

gitea-mirror commented

2026-05-05 14:02:49 -06:00

Author

Owner

@blankhang commented on GitHub (Feb 11, 2024):

不知道哪里出了问题，麻烦帮忙看看

@blankhang commented on GitHub (Feb 11, 2024): 不知道哪里出了问题，麻烦帮忙看看

gitea-mirror commented

2026-05-05 14:02:50 -06:00

Author

Owner

@eryunser commented on GitHub (Feb 27, 2024):

而且发现在文档中功能特性->Http&Https->自定义二级域名中服务端配置subdomainHost和参考->服务端配置中的subDomainHost大小写不一致

@eryunser commented on GitHub (Feb 27, 2024): 而且发现在文档中功能特性->Http&Https->自定义二级域名中服务端配置subdomainHost和参考->服务端配置中的subDomainHost大小写不一致

gitea-mirror commented

2026-05-05 14:02:51 -06:00

Author

Owner

@github-actions[bot] commented on GitHub (Mar 20, 2024):

Issues go stale after 21d of inactivity. Stale issues rot after an additional 7d of inactivity and eventually close.

@github-actions[bot] commented on GitHub (Mar 20, 2024): Issues go stale after 21d of inactivity. Stale issues rot after an additional 7d of inactivity and eventually close.