mirror of
https://github.com/fatedier/frp.git
synced 2026-05-15 08:05:49 -06:00
[GH-ISSUE #3704] Docker版本FRPS,FRPC出問題 #2949
Labels
No labels
In Progress
WIP
WaitingForInfo
bug
doc
duplicate
easy
enhancement
future
help wanted
invalid
lifecycle/stale
need-issue-template
need-usage-help
no plan
proposal
pull-request
question
todo
No milestone
No project
No assignees
1 participant
Notifications
Due date
No due date set.
Dependencies
No dependencies set.
Reference: github-starred/frp#2949
Loading…
Add table
Add a link
Reference in a new issue
No description provided.
Delete branch "%!s()"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
Originally created by @liaobadadi on GitHub (Oct 19, 2023).
Original GitHub issue: https://github.com/fatedier/frp/issues/3704
Bug Description
1.無法打開ip:7500端口
2.用Windows 版本Client 也連不上服務器FRPS
頁面顯示:
当前无法使用此页面124.222.107.89 未发送任何数据。
ERR_EMPTY_RESPONSE
frpc Version
frps v0.52.1
frps Version
frps v0.52.1
System Architecture
Docker 容器部署fatedier/frps
Configurations
Volumn 映射 -> /etc/frp : /etc/frp
7500端口 橋接出HOST
A literal address or host name for IPv6 must be enclosed
in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
For single "bind_addr" field, no need square brackets, like "bind_addr = ::".
bindAddr = "0.0.0.0"
bindPort = 7000
udp port used for kcp protocol, it can be same with 'bind_port'.
if not set, kcp is disabled in frps.
kcpBindPort = 7000
udp port used for quic protocol.
if not set, quic is disabled in frps.
quicBindPort = 7002
Specify which address proxy will listen for, default value is same with bind_addr
proxy_bind_addr = "127.0.0.1"
quic protocol options
transport.quic.keepalivePeriod = 10
transport.quic.maxIdleTimeout = 30
transport.quic.maxIncomingStreams = 100000
Heartbeat configure, it's not recommended to modify the default value
The default value of heartbeat_timeout is 90. Set negative value to disable it.
transport.heartbeatTimeout = 90
Pool count in each proxy will keep no more than maxPoolCount.
transport.maxPoolCount = 5
If tcp stream multiplexing is used, default is true
transport.tcpMux = true
Specify keep alive interval for tcp mux.
only valid if tcpMux is true.
transport.tcpMuxKeepaliveInterval = 60
tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
If negative, keep-alive probes are disabled.
transport.tcpKeepalive = 7200
transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false.
tls.force = false
transport.tls.certFile = "server.crt"
transport.tls.keyFile = "server.key"
transport.tls.trustedCaFile = "ca.crt"
If you want to support virtual host, you must set the http port for listening (optional)
Note: http port and https port can be same with bind_port
#vhostHTTPPort = 80
#vhostHTTPSPort = 443
Response header timeout(seconds) for vhost http server, default is 60s
vhostHTTPTimeout = 60
tcpmuxHTTPConnectPort specifies the port that the server listens for TCP
HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
requests on one single port. If it's not - it will listen on this value for
HTTP CONNECT requests. By default, this value is 0.
tcpmuxHTTPConnectPort = 1337
If tcpmux_passthrough is true, frps won't do any update on traffic.
tcpmuxPassthrough = false
Configure the web server to enable the dashboard for frps.
dashboard is available only if webServer.port is set.
webServer.addr = "127.0.0.1"
webServer.port = 7500
webServer.user = "admin"
webServer.password = "*fefrgfdefxxxxxxxxxxxxxxxxxxxxxxxxxxx&A"
webServer.tls.certFile = "server.crt"
webServer.tls.keyFile = "server.key"
dashboard assets directory(only for debug mode)
webServer.assetsDir = "./static"
Enable golang pprof handlers in dashboard listener.
Dashboard port must be set first
webServer.pprofEnable = false
enablePrometheus will export prometheus metrics on webServer in /metrics api.
#enablePrometheus = true
console or real logFile path like ./frps.log
log.to = "./frps.log"
trace, debug, info, warn, error
log.level = "debug"
log.maxDays = 3
disable log colors when log.to is console, default is false
log.disablePrintColor = false
DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
detailedErrorsToClient = true
auth.method specifies what authentication method to use authenticate frpc with frps.
If "token" is specified - token will be read into login message.
If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
auth.method = "token"
auth.additionalScopes specifies additional scopes to include authentication information.
Optional values are HeartBeats, NewWorkConns.
auth.additionalScopes = ["HeartBeats", "NewWorkConns"]
auth token
auth.token = "sHfwefefcvew34gtrfd3Q"
oidc issuer specifies the issuer to verify OIDC tokens with.
#auth.oidc.issuer = ""
oidc audience specifies the audience OIDC tokens should contain when validated.
#auth.oidc.audience = ""
oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired.
#auth.oidc.skipExpiryCheck = false
oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
#auth.oidc.skipIssuerCheck = false
userConnTimeout specifies the maximum time to wait for a work connection.
userConnTimeout = 10
Only allow frpc to bind ports you list. By default, there won't be any limit.
allowPorts = [
{ start = 3200, end = 3400 },
{ single = 3389 },
{ start = 3600, end = 37000 }
]
Max ports can be used for each client, default value is 0 means no limit
maxPortsPerClient = 0
If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file
When subdomain is est, the host used by routing is test.frps.com
#subDomainHost = "xxxxxxxx"
custom 404 page for HTTP requests
custom404Page = "/path/to/404.html"
specify udp packet size, unit is byte. If not set, the default value is 1500.
This parameter should be same between client and server.
It affects the udp and sudp proxy.
udpPacketSize = 1500
Retention time for NAT hole punching strategy data.
natholeAnalysisDataReserveHours = 168
#httpPlugins
#name = "user-manager"
#addr = "127.0.0.1:9000"
#path = "/handler"
#ops = ["Login"]
#httpPlugins
#name = "port-manager"
#addr = "127.0.0.1:9001"
#path = "/handler"
#ops = ["NewProxy"]
Logs
2023/10/19 14:47:54 [I] [root.go:104] frps uses command line arguments for config
2023/10/19 14:47:54 [I] [service.go:200] frps tcp listen on 0.0.0.0:7000
2023/10/19 14:47:54 [I] [root.go:111] frps started successfully
Steps to reproduce
...
Affected area
@XYZliang commented on GitHub (Oct 20, 2023):
一样存在docker版本打不开7500管理页面的问题：
webServer.addr = "0.0.0.0" webServer.port = 7500 webServer.user = "admin" webServer.password = "XXXXXXXX"似乎根本没生效：
2023/10/19 14:27:21 [I] [root.go:102] frps uses config file: /etc/frp/frps.toml 2023/10/19 14:27:21 [I] [service.go:200] frps tcp listen on 0.0.0.0:7000 2023/10/19 14:27:21 [I] [root.go:111] frps started successfully 2023/10/19 14:27:22 [I] [service.go:533] [f55e71bc37c551dc] client login info: ip [39.XXX13:1376] version [0.47.0] hostname [] os [linux] arch [amd64] 2023/10/19 14:27:22 [I] [service.go:533] [6e2fe2641d5fe504] client login info: ip [39.XXX.34.114:1601] version [0.48.0] hostname [] os [linux] arch [amd64] 2023/10/19 14:27:22 [I] [tcp.go:82] [f55e71bc37c551dc] [LuOpenWrt.JDC] tcp proxy listen port [20081] 2023/10/19 14:27:22 [I] [control.go:500] [f55e71bc37c551dc] new proxy [LuOpenWrt.JDC] type [tcp] success 2023/10/19 14:27:22 [I] [tcp.go:82] [f55e71bc37c551dc] [LuOpenWrt.OWssh] tcp proxy listen port [20022] 2023/10/19 14:27:22 [I] [control.go:500] [f55e71bc37c551dc] new proxy [LuOpenWrt.OWssh] type [tcp] success .......其他链接信息@alexcdever commented on GitHub (Oct 20, 2023):
我也差不多，我是连启动都启动失败，直到将版本号回滚到0.51.3才能正常跑起来
@wuai1024 commented on GitHub (Oct 20, 2023):
@liaobadadi commented on GitHub (Oct 23, 2023):
我改过了，试过0.0.0.0 ，试过127.0.0.1 ，服务器IP 都不行。
@liaobadadi commented on GitHub (Oct 24, 2023):
可能windows 版本的FRPC/FRPS没有太大问题，但是DOCKER 我也回滚到0.51.3才用起来，TOML格式，我也试了很多次，用网络host也不行，用-d 端口：端口也不行，用DOCKER INSPECT 没看到expose的端口，自己用docker build +expose 7500 ，看不到dashboard,是在没辙了。
@fatedier commented on GitHub (Oct 24, 2023):
监听成功了之后，frps 日志会显示这样一行:
Dashboard listen on 0.0.0.0:7500，否则说明配置文件配置错误，或者使用了错误的配置文件。我自己基本上不用 docker，但是 mac 下测试没问题:
docker run -v ./:/etc/frp --rm -it fatedier/frps:v0.52.2 -c /etc/frp/frps.toml建议不要直接 copy 一大堆配置上去，根据文档只添加必要的内容。
@liaobadadi commented on GitHub (Oct 25, 2023):
==================================================================
我又不断尝试：
docker 命令：docker run -v /dkprog/frps:/etc/frp -p 7500:7500 --rm -it fatedier/frps:v0.52.2
Toml；文件 在 容器内、etc/frp/可见 frps.toml
frps.toml 如下：
bindPort = 7000
webServer.addr = "0.0.0.0"
webServer.port = 7500
webServer.user = "admin"
webServer.password = "admin"
容器里面看服务7500端口压根没有启动任何服务，感觉还是容器本身的问题：大佬能在LINUX里面测试下？
/ # netstat -lpnt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 :::7000 :::* LISTEN 1/frps
@Crazyokd commented on GitHub (Nov 9, 2023):
今天我升级docker版本的frps，然后一直连不上，排查发现配置文件使用的老的.ini，但是docker中使用的新的.toml.
详情见我这个issue
@Crazyokd commented on GitHub (Nov 9, 2023):
7500端口打不开是因为默认使用127.0.0.1，需要配置为0.0.0.0
@github-actions[bot] commented on GitHub (Dec 10, 2023):
Issues go stale after 30d of inactivity. Stale issues rot after an additional 7d of inactivity and eventually close.
@bosswnx commented on GitHub (Dec 11, 2023):
我也遇到了一样的问题，希望能够尽早解决
@Semoz commented on GitHub (Dec 13, 2023):
说的对，不要增加不必要的配置文件，docker compose测试没有问题
@NULL-Response commented on GitHub (Dec 30, 2023):
这可能是个新版本的bug，把webServer.addr改成ifconfig中eth0的ip即可，见https://github.com/fatedier/frp/issues/3861
@github-actions[bot] commented on GitHub (Jan 26, 2024):
Issues go stale after 21d of inactivity. Stale issues rot after an additional 7d of inactivity and eventually close.