/* ========================================
 *  Tube - Tube.h
 *  Copyright (c) 2016 airwindows, Airwindows uses the MIT license
 * ======================================== */

#ifndef __Tube_H
#include "Tube.h"
#endif

void Tube::processReplacing(float **inputs, float **outputs, VstInt32 sampleFrames) 
{
    float* in1  =  inputs[0];
    float* in2  =  inputs[1];
    float* out1 = outputs[0];
    float* out2 = outputs[1];

	double overallscale = 1.0;
	overallscale /= 44100.0;
	overallscale *= getSampleRate();

	double gain = 1.0+(A*0.2246161992650486);
	//this maxes out at +1.76dB, which is the exact difference between what a triangle/saw wave
	//would be, and a sine (the fullest possible wave at the same peak amplitude). Why do this?
	//Because the nature of this plugin is the 'more FAT TUUUUBE fatness!' knob, and because
	//sticking to this amount maximizes that effect on a 'normal' sound that is itself unclipped
	//while confining the resulting 'clipped' area to what is already 'fattened' into a flat
	//and distorted region. You can always put a gain trim in front of it for more distortion,
	//or cascade them in the DAW for more distortion.
	double iterations = 1.0-A;
	int powerfactor = (5.0*iterations)+1;
	double gainscaling = 1.0/(double)(powerfactor+1);
	double outputscaling = 1.0 + (1.0/(double)(powerfactor));
    
    while (--sampleFrames >= 0)
    {
		double inputSampleL = *in1;
		double inputSampleR = *in2;
		if (fabs(inputSampleL)<1.18e-23) inputSampleL = fpdL * 1.18e-17;
		if (fabs(inputSampleR)<1.18e-23) inputSampleR = fpdR * 1.18e-17;
		
		if (overallscale > 1.9) {
			double stored = inputSampleL;
			inputSampleL += previousSampleA; previousSampleA = stored; inputSampleL *= 0.5;
			stored = inputSampleR;
			inputSampleR += previousSampleB; previousSampleB = stored; inputSampleR *= 0.5;
		} //for high sample rates on this plugin we are going to do a simple average		
		
		inputSampleL *= gain;
		inputSampleR *= gain;
		
		if (inputSampleL > 1.0) inputSampleL = 1.0;
		if (inputSampleL < -1.0) inputSampleL = -1.0;
		if (inputSampleR > 1.0) inputSampleR = 1.0;
		if (inputSampleR < -1.0) inputSampleR = -1.0;
		
		double factor = inputSampleL; //Left channel
		
		for (int x = 0; x < powerfactor; x++) factor *= inputSampleL;
		//this applies more and more of a 'curve' to the transfer function
		
		if ((powerfactor % 2 == 1) && (inputSampleL != 0.0)) factor = (factor/inputSampleL)*fabs(inputSampleL);
		//if we would've got an asymmetrical effect this undoes the last step, and then
		//redoes it using an absolute value to make the effect symmetrical again
		
		factor *= gainscaling;
		inputSampleL -= factor;
		inputSampleL *= outputscaling;
		
		factor = inputSampleR; //Right channel
		
		for (int x = 0; x < powerfactor; x++) factor *= inputSampleR;
		//this applies more and more of a 'curve' to the transfer function
		
		if ((powerfactor % 2 == 1) && (inputSampleR != 0.0)) factor = (factor/inputSampleR)*fabs(inputSampleR);
		//if we would've got an asymmetrical effect this undoes the last step, and then
		//redoes it using an absolute value to make the effect symmetrical again
		
		factor *= gainscaling;
		inputSampleR -= factor;
		inputSampleR *= outputscaling;
		
		/*  This is the simplest raw form of the 'fattest' TUBE boost between -1.0 and 1.0
		 
		 if (inputSample > 1.0) inputSample = 1.0; if (inputSample < -1.0) inputSample = -1.0;
		 inputSample = (inputSample-(inputSample*fabs(inputSample)*0.5))*2.0;
		 
		 */
		
		if (overallscale > 1.9) {
			double stored = inputSampleL;
			inputSampleL += previousSampleC; previousSampleC = stored; inputSampleL *= 0.5;
			stored = inputSampleR;
			inputSampleR += previousSampleD; previousSampleD = stored; inputSampleR *= 0.5;
		} //for high sample rates on this plugin we are going to do a simple average
		
		//begin 32 bit stereo floating point dither
		int expon; frexpf((float)inputSampleL, &expon);
		fpdL ^= fpdL << 13; fpdL ^= fpdL >> 17; fpdL ^= fpdL << 5;
		inputSampleL += ((double(fpdL)-uint32_t(0x7fffffff)) * 5.5e-36l * pow(2,expon+62));
		frexpf((float)inputSampleR, &expon);
		fpdR ^= fpdR << 13; fpdR ^= fpdR >> 17; fpdR ^= fpdR << 5;
		inputSampleR += ((double(fpdR)-uint32_t(0x7fffffff)) * 5.5e-36l * pow(2,expon+62));
		//end 32 bit stereo floating point dither
		
		*out1 = inputSampleL;
		*out2 = inputSampleR;

		in1++;
		in2++;
		out1++;
		out2++;
    }
}

void Tube::processDoubleReplacing(double **inputs, double **outputs, VstInt32 sampleFrames) 
{
    double* in1  =  inputs[0];
    double* in2  =  inputs[1];
    double* out1 = outputs[0];
    double* out2 = outputs[1];

	double overallscale = 1.0;
	overallscale /= 44100.0;
	overallscale *= getSampleRate();
	
	double gain = 1.0+(A*0.2246161992650486);
	//this maxes out at +1.76dB, which is the exact difference between what a triangle/saw wave
	//would be, and a sine (the fullest possible wave at the same peak amplitude). Why do this?
	//Because the nature of this plugin is the 'more FAT TUUUUBE fatness!' knob, and because
	//sticking to this amount maximizes that effect on a 'normal' sound that is itself unclipped
	//while confining the resulting 'clipped' area to what is already 'fattened' into a flat
	//and distorted region. You can always put a gain trim in front of it for more distortion,
	//or cascade them in the DAW for more distortion.
	double iterations = 1.0-A;
	int powerfactor = (5.0*iterations)+1;
	double gainscaling = 1.0/(double)(powerfactor+1);
	double outputscaling = 1.0 + (1.0/(double)(powerfactor));
    
    while (--sampleFrames >= 0)
    {
		double inputSampleL = *in1;
		double inputSampleR = *in2;
		if (fabs(inputSampleL)<1.18e-23) inputSampleL = fpdL * 1.18e-17;
		if (fabs(inputSampleR)<1.18e-23) inputSampleR = fpdR * 1.18e-17;
		
		if (overallscale > 1.9) {
			double stored = inputSampleL;
			inputSampleL += previousSampleA; previousSampleA = stored; inputSampleL *= 0.5;
			stored = inputSampleR;
			inputSampleR += previousSampleB; previousSampleB = stored; inputSampleR *= 0.5;
		} //for high sample rates on this plugin we are going to do a simple average		
		
		inputSampleL *= gain;
		inputSampleR *= gain;
		
		if (inputSampleL > 1.0) inputSampleL = 1.0;
		if (inputSampleL < -1.0) inputSampleL = -1.0;
		if (inputSampleR > 1.0) inputSampleR = 1.0;
		if (inputSampleR < -1.0) inputSampleR = -1.0;
		
		double factor = inputSampleL; //Left channel
		
		for (int x = 0; x < powerfactor; x++) factor *= inputSampleL;
		//this applies more and more of a 'curve' to the transfer function
		
		if ((powerfactor % 2 == 1) && (inputSampleL != 0.0)) factor = (factor/inputSampleL)*fabs(inputSampleL);
		//if we would've got an asymmetrical effect this undoes the last step, and then
		//redoes it using an absolute value to make the effect symmetrical again
		
		factor *= gainscaling;
		inputSampleL -= factor;
		inputSampleL *= outputscaling;
		
		factor = inputSampleR; //Right channel
		
		for (int x = 0; x < powerfactor; x++) factor *= inputSampleR;
		//this applies more and more of a 'curve' to the transfer function
		
		if ((powerfactor % 2 == 1) && (inputSampleR != 0.0)) factor = (factor/inputSampleR)*fabs(inputSampleR);
		//if we would've got an asymmetrical effect this undoes the last step, and then
		//redoes it using an absolute value to make the effect symmetrical again
		
		factor *= gainscaling;
		inputSampleR -= factor;
		inputSampleR *= outputscaling;
		
		/*  This is the simplest raw form of the 'fattest' TUBE boost between -1.0 and 1.0
		 
		 if (inputSample > 1.0) inputSample = 1.0; if (inputSample < -1.0) inputSample = -1.0;
		 inputSample = (inputSample-(inputSample*fabs(inputSample)*0.5))*2.0;
		 
		 */
		
		if (overallscale > 1.9) {
			double stored = inputSampleL;
			inputSampleL += previousSampleC; previousSampleC = stored; inputSampleL *= 0.5;
			stored = inputSampleR;
			inputSampleR += previousSampleD; previousSampleD = stored; inputSampleR *= 0.5;
		} //for high sample rates on this plugin we are going to do a simple average
		
		//begin 64 bit stereo floating point dither
		//int expon; frexp((double)inputSampleL, &expon);
		fpdL ^= fpdL << 13; fpdL ^= fpdL >> 17; fpdL ^= fpdL << 5;
		//inputSampleL += ((double(fpdL)-uint32_t(0x7fffffff)) * 1.1e-44l * pow(2,expon+62));
		//frexp((double)inputSampleR, &expon);
		fpdR ^= fpdR << 13; fpdR ^= fpdR >> 17; fpdR ^= fpdR << 5;
		//inputSampleR += ((double(fpdR)-uint32_t(0x7fffffff)) * 1.1e-44l * pow(2,expon+62));
		//end 64 bit stereo floating point dither
		
		*out1 = inputSampleL;
		*out2 = inputSampleR;

		in1++;
		in2++;
		out1++;
		out2++;
    }
}